Täältä löydät Amprobe-tuotteiden uutuusluettelon. Tarkemmat tuotekuvaukset ja myynnissä olevien laitteiden tekniset tiedot ovat kunkin tuoteryhmän ja laitteen omilla sivuilla niissä tapauksissa, joissa tietoja on toistaiseksi saatavilla.
Voit ladata englanninkielisen 2014-tuoteluettelon tästä.
Tärkeimmät toiminnot:
Mittaustoiminnot:
Ominaisuudet:
Beha-Amproben kaksinapaiset jännitteenkoettimet 2100-Alpha ja 2100-Beta ovat helppokäyttöisiä ja kestäviä testereitä jännitteen sekä jatkuvuuden toteamista varten. Tuotteet on valmistettu jännitetesteristandardin EN 61243-3:2010 mukaisesti. Testereiden turvaluokitus on CAT IV 600V / CAT III 690 V ja niillä on myös GS-hyväksyntä.
Molemmissa malleissa on LED-näyttö ja 2100-Beta -mallissa lisäksi LCD-näyttö. Molemmissa on myös kiertosuunnan näyttö, kahdella napilla vaihdettavissa oleva kuormitus, yksinapainen vaiheentunnistus sekä jatkuvuustestaus, taskulampputoiminto ja vieläpä IP64-tasoinen suojaus pölyä ja likaa vastaan.
Ominaisuudet:
ProInstall 100- ja 200-testereillä voi helposti testata sähköasennukset SFS-6000 -standardin mukaisesti. Laitteet soveltuvat niin asuinhuoneistojen kuin kaupallisten ja teollistenkin ympäristöjen sähköasennuksen turvallisuuden ja laadun testaamiseen.
Mittarisarja on suunniteltu suorittamaan nämä tehtävät nopeasti. Mallissa ProInstall 200 on testauksen nopeuttamiseksi lisäksi automaattinen vikavirtasuojatesti.
Ominaisuudet ja mittaustavat:
Ominaisuudet:
Tekniset tiedot (englanniksi):
FEATURE |
INSP-3 |
Best Accuracy |
Load: |
Constant 10, 15 or 20 AMP simulation regardless of line voltage |
- |
Operating voltage: |
95 VAC → 140 VAC |
+/- 2 % + 2 digits |
GFI trip: |
6.0 mA nominal to trip GFI, 30 mA to trip RCD |
- |
AFCI trip: |
Up to 8, 120 AMP pulses within 1/2 second period |
- |
Specifications |
|
Load: |
Constant 0, 10, 15 or 20 AMP simulation regardless of line voltage |
Operating voltage: |
95-140 VAC +/-2%, +/- 2 digits |
GFI trip: |
6.0 mA nominal to trip GFI, 30 mA to trip RCD |
AFCI trip: |
Up to 8, 120 AMP pulses within 1/2 second period |
Ominaisuudet:
Tekniset tiedot (englanniksi):
SPECIFICATIONS |
IR-450 |
Distance to Spot (D:S) |
8:1 (calculated at 80% energy) |
Temperature Range |
-30°C to 500°C (-22°F to 932°F) |
Accuracy at 23°C ±2°C, <80%RH |
-30°C to 10°C (-22°F to 50°F): ±2°C(+/-4°F) |
Best Accuracy |
±2°F / ± 1°C |
Best Display Resolution |
0.5°F / 0.2°C |
Response Time |
500 ms |
Emissivity |
0.95 |
Laser Wavelength |
630 nm to 670 nm |
Spectral Response |
6.5 μm to 18 μm |
Repeatability |
±1°C or ±0.5% of reading, whichever is greater. |
Display Hold |
10 seconds |
Operating Altitude |
Up to 2000 meters |
Battery |
One 1.5VAAA battery |
Battery Life |
20 hours (Alkaline typically) |
Storage Temperature |
-40°F to 140°F (-20°C to 60°C) (without battery) ≤ 85% RH |
Dimensions (L x W x H) |
100 x 20 x 29mm (3.94 x 0.79 x 1.14in) |
Weight |
Approximately 50g (0.11lb) |
Safety Compliance |
EN 61010-1, EN 60825-1 |
EMC Compliance |
EN 61326-1 |
Certification |
CE |
Laser Safety Info |
100% FDA Compliant |
Laser Safety Class |
Class 2 |
Ominaisuudet:
Tekniset tiedot (englanniksi):
FEATURE |
IR-750 |
Distance to Spot (D:S) |
50:01:00 |
Temperature Range |
-50 °C to 1550 °C |
Best Accuracy |
±1.8% |
Emissivity |
Adjustable from 0.10 to 1.00 |
|
4000.1 ⁰C / 0.1 ⁰F; 0.1 ⁰C / 0.1 ⁰F of reading < 999.9 |
MIN/MAX Memory |
• |
DIF/AVG Temperature Display |
• |
Programmable high and low alarm |
• |
Tripod mount |
• |
USB interface |
• |
Built in memory |
99 |
K-Type thermocouple measurement |
• |
Supplied With |
Software CD, USB cable, K-type thermocouple probe, Carrying bag, Hard carrying case (IR-750), Battery and Users Manual |
Specifications |
|
Warranty: |
One year |
Battery life: |
10 hours with laser and backlight on, 30 hours with laser and backlight off |
Size: |
Approx.153 x 108 x 40 mm (6.0 x 4.5 x 1.6 in) |
Weight: |
Approx.180 g (0. lb) with battery installed |
Tekniset tiedot (englanniksi):
Specifications |
|
Compatible lamps |
T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs |
Test voltage |
Approximately 3 kV / 280 kHz |
Field strength |
Approximately 100 μV/m at 260 - 300 kHz |
Maximum antenna length |
48" |
Filament test |
T2, T4, T5, T8, T9, T10, T12 |
VolTect™ non-contact voltage detection |
AC 90 V to AC 600 V, 50/60 Hz |
Supplied with |
48" antenna, adaptor plate, users manual, battery and carrying case |
Specifications |
Range |
Compatible lamps |
T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs |
Test voltage |
Approximately 3 kV / 280 kHz |
Field strength |
Approximately 100 μV/m at 260 - 300 kHz |
Maximum antenna length |
48" |
Filament test |
T2, T4, T5, T8, T9, T10, T12 |
VolTect™ non-contact voltage detection |
AC 90 V to AC 600 V, 50/60 Hz |
Non-contact voltage sensitivity with probe tip (typical) |
LED illuminates and beeps at approx. 3 mm (0.12 in) distance from a wire carrying 120 Vac |
Drop proof |
36" |
Operating time |
One second ON, one second OFF for maximum five cycles and wait for 1 minute before taking another measurement |
Operating temperature |
-10°C to +50°C (14°F to 122°F) ≤ 85% RH |
Storage temperature |
-10°C to +50°C (14°F to 122°F) ≤ 85% RH |
Operating altitude |
Up to 2000 meters |
Battery |
One 9V lithium or alkaline battery only, 6LR61/6LF22/MN1604 or equivalent. |
Battery life |
Up to 500 tests (Alkaline typically) |
Dimensions (L x W x H) |
Approximately 170 x 40 x 24 mm (6.69 x 1.57 x 0.94 in) without antenna |
Weight |
Approximately 80 g (0.18 lb) with battery installed, excluding 48" antenna |
Safety compliance |
IEC 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1-04 |
EMC compliance |
IEC 61326-1 |
Certification |
CSA and CE |
Calibration |
NA |
Warranty |
1 Year |
Ominaisuudet:
Tekniset tiedot (englanniksi):
Feature |
RLD-1 |
Detectable gases |
R-134a, R-404A, R-407C, R-410A, R-22, Freon |
R-22, 134a sensitivity |
H - 3g/year, M - 15g/year, L - 30g/year |
R-404A, 407C, 410A sensitivity |
H - 4g/year, M - 20g/year, L - 40g/year |
Alarm method |
Buzzer, tricolor LED bar indicator |
Power usage |
2 C size (3V DC) alkaline batteries |
Snake tube length |
15.5 (40 cm) |
Specifications |
|
Detectable gases: |
R-134a, R-404A, R-407C, R-410A, R-22 etc |
R-22, 134a: |
H - 3g/year / M - 15g/year / L - 30g/year |
R-404A, 407C, 410A: |
H - 4g/year / M - 20g/year / L - 40g/year |
Alarm method: |
Buzzer, tricolor LED bar indicator |
Power usage: |
2 C size (3V DC) alkaline batteries |
Snake tube length: |
40cm ( 15.5 ) |
Auto power off: |
10 minutes |
Disable auto power off: |
Press and hold “Hi" button then power on the meter |
Ominaisuudet:
Tekniset tiedot (englanniksi):
FEATURE |
RTD-10 |
RTD-10W |
Wireless transmission |
- |
• |
Temperature |
RTD: Pt385 (100 O), Pt3916/Pt3926 (100 O) |
|
Accuracy |
+/- (0.05 %rdg + 0.4 °F) on °F scale |
|
Number if parameters on the display |
3 |
Specifications |
|
Display: |
4½ digit liquid crystal display (LCD) with maximum reading of 19999. |
Polarity: |
Automatic, positive implied, negative polarity indication. |
Battery: |
1.5V x 4pcs AAA size |
Wireless features frequency range: |
910~920MHz., Low current consumption less than 1mA., the transmitting distance can reach 25M without magnetic interference. |
Included accessories: |
users manual; batteries (4); USB wireless antenna; software CD |
Ominaisuudet:
Tekniset tiedot (englanniksi):
Display |
LCD, 3¾ digit, maximum reading 3999 |
Measurement Ranges (m/s) |
1,1...20,0 m/s; 0,7...72,0 km/h; 0,5...44,7 mph; 60...3937 ft/m; 0,4...38,8 KNT; 1...8 BF |
Tolerance (m3/s) |
± 5% rdg or ± 5 dgts |
Temperature |
0°C...50°C; 32°F...122°F (internal) |
Resolution |
0,1 °C/°F |
Tolerance |
± 1°C |
Power Supply |
1 x Battery 3,0 V, IEC CR 2032 |
Dimensions |
136 × 46 × 17 mm |
Weight |
approx. 135 g |
Ominaisuudet:
Tekniset tiedot (englanniksi):
VolTect™ Non-Contact, High Voltage Detection |
Low Voltage Setting: 30 V ac → 1500 V ac |
Ominaisuudet:
Tekniset tiedot (englanniksi):
FEATURE |
VPC-30 |
VPC-31 |
AC Voltage |
24 V, 48 V, 120 V, 208 V, 240 V, 277 V, 347 V, 480 V, 600 V, 1000 V |
24 V, 48 V, 120 V, 208 V, 240 V, 277 V, 347 V, 480 V, 600 V, 1000 V |
DC Voltage |
6 V, 12 V, 24 V, 36 V, 48 V, 60 V, 72 V, 110 V, 220 V, 380 V |
6 V, 12 V, 24 V, 36 V, 48 V, 60 V, 72 V, 110 V, 220 V, 380 V |
Continuity |
• |
• |
Built in shaker |
- |
• |
VolTect™ Non-Contact Voltage Detection |
• |
• |
LCD display with backlight |
- |
• |
Specifications |
|
LCD display: |
3 digits 1000 counts In an RF Field of 3V/m, total accuracy = Specified accuracy + 45d. Performance above 3V/m is not specified |
Update rate: |
5 per second nominal |
Operating temperature: |
-10ºC ~ 55ºC (14ºF ~ 131ºF) |
Relative humidity: |
Maximum relative humidity 80% for temperature up to 31ºC (87ºF) decreasing linearly to 50% relative humidity at 55ºC (131ºF) |
Altitude: |
Operating below 2000m |
Storage temperature: |
-20ºC ~60ºC (-4ºF ~ 140ºF), < 80% R.H. (with battery removed) |
Temperature coefficient: |
Nominal 0.15 x (specified accuracy)/ ºC @ (-10ºC ~ 18ºC or 28ºC ~ 55ºC), or otherwise specified |
Sensing: |
Average sensing |
Type of protection: |
IP65 |
Pollution degree: |
2 |
Safety: |
Meets EN61010-1 and IEC61010-1 2nd Edition (2001) |
Measurement category: |
CAT III 1000V & CAT IV 600V AC & DC |
Transient protection: |
8kV lightning surge (1.2/50µs) |
Overload protection: |
1000V DC & V AC rms |
Low battery: |
Below approx. 2.4V |
Power supply: |
Standard 1.5V AAA Size (NEDA 24G or IEC R03) battery X 2; or 1.5V AAA Size (NEDA 24A or IEC LR03) alkaline battery X 2 |
Power consumption (typical): |
3mA at power-on ready; 30mA at 1000VAC full LED indication. 75mA at 1000VAC with shaker on |
APO consumption (typical): |
10µA |
Special features: |
High input impedance, indicator self-test, auto-hold, overload-alert warning, EF-detection, |
Special features: |
Auto display backlit, AC-detection shaker, Bi-color LED hazardous live warning, and GFCI leakage load |